Adjustment Program CX7300, CX8300 CX9300F

Here are new sets of reseters shared to us by another member "e2500e". Many thanks to you guys who are very supportive and generous in our group.We were able to test the C110 reseter with an actual printer and it's working. All others were not tested with an actual printer but the good news is, the program itself is working even without the printer unlike other copies that are circulating in the net in which we are stuck in particular mode.Good luck to everyone who needs these reseters. Please give your feedback through indoreset mailing list.

Epson C110 Adjustment Download
Epson CX7300 Adjustment Download
Epson CX8300 Adjustment Download
Epson CX9300F Adjustment Download
Happy reseting everyone!!!

Adjustment Program Epson R290

Hello everyone,A lot of people are asking about this reseter. After searching for quite sometime here is a working copy provided by one of our members, manny_chengjr from Philippines. Thanks guys for all the support and please continue to help the group grow by sharing your knowledge and the reseters that you have.Here is the link, in the meantime we uploaded it in divshare.Dowload

download resetter Epson Stylus C90

This for Epson printer. Reset your waste ink pad counter. If any question you can ask to me how to run Adjustment Program. Thank you. and Happy RESET!!
Note : tell your friend about my site. Maybe your friends is very needed.
Download Link
stylus photo C90 Verion Indonesia download
stylus photo C90 Version Singapore download

Reset Printer Canon MP145 and MP160

error ink cartridges are not installed properly (error E5) :

Step 1 : Push Power switch by continue (Tekan Power On/Off)
Step 2 : inserrt plug(Masukan Power, Power Tetap di Tekan)
step 3 : Tekan Tombol Reset 1x, lepaskan Tombol Pwr, Tekan Reset dua kali lagi Sampai Menjadi 0 (tekan tombol tanpa jeda)
Step 4 : Push + display change from 0 to 1 (tekan tombol + untuk merubah 0 ke 1)
Step 5 : Push Power switch again , Printer will be print 1 page(tekan tombol power –> tombol start sampai ngeprint 1 hal.)
step 6 : Open cover (buka tutup printer)
Step 7 : Unplug (cabut kabel power)
Step 8 : Take out ink 40 and 41(lepaskan catridge 40 dan 41)
Step 9 : Insert plug again (pasang kabel power)
Step 10 : Push power switch (tekan tombol power)
Step 11 : Open cover (scan cover) (buka tutup scaner)
Step 12 : Inksert ink 40 , 41 again (masukan catridge 40 dan 41)

waste ink counter (error E16) :

1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF
2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x
3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE
4. Printer akan charging
5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x. (Waste ink counter reset)
6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye
7. Matikan printer dan cabut kabel POWER
8. Hidupkan kembali printer.

The number of the Reset :
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code/Kode Error :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

Download manual service printer
Reset Waste_Ink_Canon_Pixma_MP130.pdf
Reset_Waste_Ink_Canon_i320_and_i255.pdf
Reset_Waste_Ink_Canon_Pixma_MPC190.pdf
Reset_Waste_Ink_Canon_Pixma_MP110.pdf
Reset_waste_ink_canon_iP4000.pdf
Reset_Waste_Ink_Printer_Canon_BJC_2000_and_BJC_2100.pdf.html

Download Link :
Reset All type canon MP cklik

Canon S450 Color Bubble Jet

1. Power off printer

2. Hold Resume button then press and hold POWER, the beeper will sound once.

3. Hold POWER and release RESUME

4. Press RESUME twice

5. Release Power button

6. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.

7. Press Power to set data

Resetter canon i255

Waste Ink Counter Reset.

Step 1 : Manual Temporary Only

1. Copot kabel power dan kabel USB.

2. Buka pintu dan tekan/tahan tombol Power.

3. Colokin kabel power.

4. Tutup pintu, kemudian lepas tombol Power

For Reset by software

or Step 1: Manual for service mode

1. Turn off the printer. And disconnect the printer cable.

2. Press and hold the POWER button, turn on the printer.

3. The indicator (L.E.D.) should be green.

4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.

5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.

6. Release both buttons.

step 2 : Software for Permanant

1. Reconnect the printer cable.

2. Open General Tools software and select (USB PORT)

3. Choose (SET DESTINATION 1) And it should be reset.

Remark “After service mode Pls use software for permanent reset”

Download Link :

Manual reset i255-i355.pdf
Reset Tool i355, i250, i255.zip

Epson Stylus R200

Service Manual Epson Stylus Photo R200-R210

1. Troubleshooting.
2. Disassembly and Assembly.
3. Adjusments.
4. Maintenance.
5. Appendix.

DOWNLOAD RESETTER PRINTER EPSON STYLUS PHOTO R200 R210 Download Free